Equipment

Personnel

  • 16 Moldmakers (5 are seasoned welders)
  • 5 machinists
  • 3 Truckdrivers
  • 1 Engineer/Programmer (various downloading capabilities including IGES)
  • 2 Estimators/Salesmen
  • 4 Office Personnel

Engineering Software

  • Mastercam XT:
  • Extensions: MCX / MX9 / MC8 / IGS / IGES / DWG / DXF / STP / STEP / 3DM / SLDPRT / IPT / TXT / CDL

Machines

  • 2016 - JOHNSFORD
    X=122” Y=71” Z=30.5”
    
6000 RPM
CA50 TAPER
  • 2017 - MILTRONICS RH33
    
X=78” Y=33” Z=28”
    
8000 RPM
CAT 40 TAPER
  • 2017 - MILTRONICS VM4020
    
X=40” Y=20” Z=20”
    
8000 RPM
CAT 40 TAPER
  • (1) -VM17 Milltronics C.N.C. Vertical Mill-30”x16”
  • (1) -ACER Ultima Mill-16”x33”
  • (1) - Clausing Lathing-14”x40”
  • (1) - ERM E.D.M. With Xermac 120amp Power Supply-22”x24”x42”
  • (1) - Precision Bridge type E.D.M. 120amp Power Supply-48”x48”x108”
  • (1) - Westhoff Electrode Drill
  • (1) - Carlton 6’x15”
  • (1) - Gallmyer and Livingston 12”x36”
  • (1) - 6”x18” ACER Surface Grinder
  • (2) – 8”x20” Supertec Model STP-1022A Automatic Surface Grinder
  • (1) - Johnson Power Hack Saw
  • (1) - 8”x12” Electrode Band Saw
  • (2) - Thermal Care Oil & Water Mold Heaters
  • (1) - Rockwell Tester
  • (1) - Portable Hardness Tester
  • (1) - Limenator Descaler

Spotting Presses

  • (1) - Drake-96”x120”x84” Daylight with Upper swing out platen
  • (1) - B.V. Millintensil-44”x58” with upper swing out platen

Welding Equipment

  • 2017 - ALM 200 MOBILE LASER WELDER
  • (1) - Miller Syncrowave 350 Tig & Stick Welder; complete with full range of torches
  • (1) - Portable Lincoln Square wave tig welder
  • (2) - Portable Welding Units
  • (5) - Assembly cells with (5) Ton Crane Capacity

Bead Room

  • (1) -14’x14’ Bead Room: Glass, sand and Tri-Mix Blast
  • (1) 2017 - UP6-50PE Rotary Screw Air Compressor
  • (1) 2013 - UP6-50PE Rotary Screw Air Compressor

Lifting Equipment

  • (2) - 20 Ton Running Bridge Crane with a 10 Ton Slave Crane
  • (1) - 10 Ton Running Bridge Crane
  • (2) - 10 Ton Monorail Cranes
  • (5) - 1 Ton Jib Cranes
  • (1) - 10,000# Tow motor

Finishing Equipment

  • Each Mold Maker has the power to bring finishes to a #1 Finish
  • (5) Fully Equipped Finishing assembly cells under 5 Ton Mono Crane
  • (2) Ultra Sonic Polishers

Trucking

  • 3 - Chevy Pickup Trucks - 4,000 Lbs
  • 1- 2013 Freightliner - 30,000 Lbs
  • 1 - 2015 Freightliner - 10,000 Lbs